-: Humidity Sensor Kits
	UPS-500 KIT SC-500 with filter network and sensor socket. Five UPS-500 sensors. SC-500 is wired with 6” stripped and tinned w24 gauge wires. UPS-600 KIT SC-600 with filter network and sensor socket. Five UPS-600 sensors. SC-600 is wired with 6” stripped and tinned 24 gauge wire leads. HS-Series KIT SC-500 card with filter network and sensor socket. One HS-0 sensor range 10 to 50%RH, one HS-5 sensor range 50– 90 %RH. SC-500 card with 6” stripped and tinned 24 gauge wire leads.

	-: Signal Conditioner with Sensors
	SC-500 Linear output signal conditioner with resistive type humidity sensor. Non-condensing environments. Excitation voltage 150 mV RMS @ 3.8 KHz. Range of operation 20 - 90 % @70 °F +/- 2%, temp. -4 to +140°F. Requires a 5 volt DC regulated power supply. SC-600 Linear output signal conditioner with a waterproof resistive type humidity sensor. For condensing environments. Excitation voltage 150 mV @ 44 Hz. Range of operation 20 - 90 % @70°F +/- 2%, temp. –4 to +140°F. Requires a 5 volt Dc regulated power supply.   SC-600E Resistive type humidity sensor with sealed electronics. Replaceable sensor. Linear output, 5 VDC regulated supply voltage required . Range of operation 20 - 90 % @70°F +/- 2%, temp. –4 to +140°F. 3 foot shielded sensor cable. Used in ethylene oxide and other gas environments.

	-: Hybrid Humidity Sensors
	HC-610 Thermoset polymer capacitive humidity sensor. Hybrid electronics. Linear output. Range 5 to 95 %RH +/- 2%. Temp. – 40 to 185 °F. Supply voltage 4.0 - 5.8 VDC   HC-700 Thermoset polymer capacitive humidity sensor. Hybrid electronics. Nickel TO-39 packing. Linear output. Range 5 to 95 %RH +/- 2%. Temp. – 40 to 185 °F. Supply voltage 4.0 to 5.8 VDC. Better resistance to environmental contamination.

	-: Humidity Sensors
	ABS-300 ABSOLUTE HUMIDITY SENSOR range 0 to 130 g/m3 with an output of 0-13 mV. IDEAL FOR HARSH ENVIRONMENT. Thermal conductivity, operation from 25°C to 200°C, Condensation proof. Immune to chemical vapors. Aluminum sensor housing and over braided shielded cable in twenty eight inch or fifteen foot lengths. UPS-500 RESISTIVE TYPE HUMIDITY SENSOR. Non-condensing environments. Excitation voltage 1 VAC @ 33 Hz to 10 KHz. Range of operation 20 - 90 % @70 °F +/- 2%, temp. -4 to +140°F. Reverse logarithmic output. Available as signal conditioner and sensor SC-500.   UPS-600 "WATERPROOF" RESISTIVE TYPE HUMIDITY SENSOR. For condensing environments. Excitation voltage 1 VAC @ 33 Hz to 10 KHz. Range of operation 20 - 90 % @70°F +/- 2%, temp. 32 to +122°F. Reverse logarithmic output. Available as signal conditioner and sensor the SC-600.   HS-Series NARROW RANGE RESISTIVE TYPE HUMIDITY SENSOR. 1% accuracy. Excitation voltage 1 - 6 @ 33 Hz to 33 KHz. Temp 0 to 160°F. Eight sensors over a range of .7 to 99% RH. Use with the HCL/SC signal conditioner or controller card.   SC-500 LINEAR OUTPUT SIGNAL CONDITIONER with RESISTIVE TYPE HUMIDITY SENSOR. Non-condensing environments. Excitation voltage 150 mV RMS @ 3.8 KHz. Range of operation 20 - 90 % @70 °F +/- 2%, temperature -4 to +140°F. Requires a 5 volt DC regulated power supply. SC-600 LINEAR OUTPUT SIGNAL CONDITIONER with RESISTIVE TYPE HUMIDITY SENSOR. For condensing environments. Excitation voltage 150 mV @ 44 Hz. Range of operation 20 - 90 % @70°F +/- 2%, temp. –32 to +122°F. Requires a 5 volt Dc regulated power supply.   SC-600E RESISTIVE TYPE HUMIDITY SENSOR WITH SEALED ELECTRONICS. Replaceable sensor. Linear output, 5 VDC regulated supply voltage required . Range of operation 20 - 90 % @70°F +/- 2%, temp. –-4 to +140°F. 3 foot shielded sensor cable. Used in ethylene oxide and other gas environments.

	-: Product Line "A Wide Selection Of Humidity Products And Ultrasound Power Meters"
	HUMIDITY SENSORS & SIGNAL CONDITIONERS ABS-300 Absolute Humidity Sensor UPS-500 Resistive RH sensor for non-condensing environments UPS-600 Waterproof Resistive RH sensor for condensing environments HC-610 Capacative Hybrid RH sensor with signal conditioning HC-700 Same as HC-610 in a TO-39 package HS Series Narrow range RH sensors to 1% RH SC-600E RH transmitter for harsh environments. Replaceable sensor SC-500 Linear output signal conditioner/sensor for non-condensing environments SC-600 Linear output signal conditioner/sensor for condensing environments HUMIDITY INSTRUMENTATION AHT-200 Series Absolute Humidity Transmitters voltage or 4-20 mA output DM-509 Hand held meter 5-95 %RH EHC-100 Humidity Controller. Low cost HCL/SC Card Signal conditioning and control card for HS sensors HX/HT Series RH transmitters & probes. Analog and digital output RH GENERATORS & CALIBRATORS S-904 Climate chamber range 5 to 95 %RH, 10 to 50°C S-503 RH generator 5 to 90 % RH RH Vials Humidity calibration. 5 ranges DEW POINT METERS Range -40 to +80 °F AMM-10 Dewpoint Controller with Audio and Visual Alarms. Meets AAMI and NFPA standardds. AMM-15 Hand held Dewpoint Meter/Logger. Pressurized DP to 175 PSI. DPX-200 Dewpoint transmitter analog out with optional RS-232 output DPM-35XR Portable Dewpoint monitor sample pump and pressure modes DPM-35XRN Dewpoint monitor Nema enclosure sample pump and pressure modes DPSC-35XR Kit Dewpoint monitor/controller kit for OEM installtion or R&D ULTRASOUND POWER METERS UPM-DT-1AV 2 mW resolution UPM-DT-10AV 20 mW resolution UPM-DT-100AV 200 mW resolution UPM-30 150 mW resolution OTHER PRODUCTS SI-100N(D) Portable safety inspector BET-300AD(L) Biomedical electrical safety inspector MCSP(L) 8 Channel Sensor processor / logger PPM Series Precision pressure meter to 100 PSI